Overview | HD-R512T receiving card is a receiving card used with gray-scale synchronous sending card/asynchronous sending card/two-in-one
processor. It supports multi-card cascading, arbitrary ordering, conventional chips and mainstream PWM chips, and static to 1/64
scan method. |
With sending card | Dual-mode sending box，Asynchronous sending card,Synchronous sending card, Video processor of VP series. |
Module type | Compatible with all common IC module, supported most PWM IC module. |
Scan mode | Supports any scanning method from static to 1/64 scan |
Communication method | Gigabit Ethernet |
Control range | 65536 pixels (128*512) Outdoor module width ≤256, Indoor module width ≤128 |
Multi-card connection | Receiving card can be put in any sequence |
Gray scale | 256~65536 |
Smart setting | A few simple steps to complete the smart settings, through the screen layout can be set to go with any alignment of the screen
unit board |
Test functions | Receiving card integrated screen test function, Test display brightness uniformity and display module flatness. |
Communication distance | Super Cat5,Cat6 network cable within 80 meters |
Port | 5V DC Power*2,1Gbps Ethernet port*2, HUB75E*12 |
Input voltage | 4V-6V |
Power | 5W |
Interface Description | 1: Gigabit Ethernet port, used to connect the sending card or receiving card, thesame two network ports are interchangeable.
2: Power interface, can be accessed with 4.5V ~ 5.5V DC voltage.
3: Power interface, can be accessed with 4.5V ~ 5.5V DC voltage( 2 or 3 connect one of them is ok).
4: Work indicator, D1 flashes to indicate that the control card is running normally,D2 flashes quickly to indicate that Gigabit has been recognized and data is being received.
5: HUB75Eport, connect to the modules.
6: Test button, used to test display brightness uniformity and display module flatness.
7: External indicator light, run light and data light. |
